Racing Truck Class
CAR REGULATIONS of Racing Truck Class
Only TT-01E / TT-02/ TT02R/ TT02RR chassis is permitted to be used in this class. Only Racing Truck type bodies (Team Hahn MAN TGS , Reinert Racing MAN TGS and Buggyra Fat Fox) can be used.
- Only Tamiya and Fully Max batteries should be used. No modifications to the battery cables or connectors are allowed. The driver should prepare by himself because it is not handed out from the race organizer.
- Tamiya ESC and Hobby Wing 60Amps Non-Boost ESC are allowed.
- Maximum Acceptable Motor 15.5T brushless or higher turn or 23 turn or higher brush motor.
- Drivers should prepare motors and esc by themselves because it is not handed out from the race organizer.
- The minimum permissible weight of a car when ready to run is 1,500ｇwith a transponder
- Clearance under the main chassis parts must exceed 5mm AFTER the race when the chassis is pushed down in max.
- Any Tamiya touring wheels and tires. Also Racing Truck wheels and tires. Dish wheels are prohibited.
- Modification to the wire of ESC or Motor is accepted
- Each Driver should prepare his own personal transponder
- Spur and Pinion:
- 61T Spur and 22T Pinion for TT01
- 70T Spur and 25T Pinion for TT02.
- These parts are allowed:
- 51019 Urethane Bumper S (TT-01, TGS)
- 51531 TT-02 G Parts (Gear)
- 53506 39mm Light Rear Swing Shaft
- 53569 Clamp Type Wheel Hub 6mm
- 53601 L.Friction 5mm Adjuster *8
- 53662 TT-01 Turnbuckle Tie-Rod Set
- 53663 Ball Diff Set (TT-01, TGS)
- 53664 TT01 Aluminum Motor Heat Sink
- 53671 TT-01 Front One-way Unit
- 53673 Toe-in Rear Upright/TT01,TGS
- 53674 Adjustable Upper Arm/TT01,TGS
- 53790 Cup Joint for Shaft
- 53792 Shaft (TT-01, TA04)
- 53864 TT-01 Aluminum Steering Link
- 54025 TT-01 TYPE-E Ball Bearing Set
- 54026 TT-01 Alu. Joint & Shaft
- 54058 TT-01E Racing Steering
- 53527 3 ｘ 32mm Titan Turnbuckle
- 54249 3x32mm Alu. Turnbuckle Shaft
- 54477 TT-02 Gear Box Jt. Univ. Shaft
- 54814 TT-02 Carbon Bumper Support
- All Tamiya Aluminum dampers and springs are allowed.